760V 27mm Surge Protection Device With 25kA Current Capacity
OBV-I25:
| Uc(maximum continuous operating voltage) |
760V |
| Iimp(impulse discharge current for class I test) |
25KA |
| In(nominal discharge current for class II test) |
25kA |
| Up(voltage protection level) |
≤1.5kv |
| response time |
≤100ns |
| Signal deterioration indication |
off-work；on-replace |
| Housing Material |
Red thermoplastic material |
| Housing self-extinguishing class |
UL94_V0 |
| Temperature range |
-40℃～+80℃ |
| humidity range |
5%～95% |
| Elevational |
≤3000m |
| Method of connecting wire |
multiple(Connect In Parallel ) |
| Thread Dimensions |
1.5mm2～35mm2 |
| Mounting method |
35mm standard rail installation |
| IP(degree of protection of enclosure) |
IP20 |
Product Features:
combination type SPD
The smallest size single phase surge protector of Iimp: 25KA ；
only 27mm width, save space;
Sealed metal air gap technology,high energy electronic trigger discharge gap, with the ability to block continuous flow
Low output residual；
fast response time (≤100ns);
lower voltage protection level ≤1.5kV
The combination type SPD characteristics:
1. lower residual pressure
can reduce the surge voltage above 6kV to less than 2 times of the maximum working voltage of the system at one time, the three-phase surge protector can reduce to 800V, and the single-phase can reduce to less than 600V
2. Full protection and integration
The combination type SPD meets the protection requirements of differential mode and common mode at the same time, and has the protection between phase and line.
3, three layers of large current filtering efficiency
The design uses multi-layer high-current filtering function:the first layer, a number of varistors and discharge tubes are respectively arranged in matrix, and then connected in series to meet the requirements of maximum flow; the second layer, the varistor and discharge tube are respectively arranged in matrix to strengthen and ensure the stability of flow capacity; The third layer uses multiple varistors in parallel with transient diodes, and then series, mainly used advantages of fast response time of transient diodes
4. Short response time
The response time of composite surge protectors is generally less than 5ns, and some are just 1ns.
5. Zero leakage current:
The combination type SPD adopts the discharge circuit of varistor, gas discharge tube and transient diode combination. The ceramic discharge tube plays a switch role in it, which effectively blocks the leakage current of varistor, so its leakage current is zero.
6, over current, over temperature protection:
The combination type SPD is temperature and current control mode circuit, block of overheating through the temperature fuse. When the over current lead to the components of electrical surge protector occur explosive or self-heating, can cut off the connection electrical surge protector and power grid timely, effective and quickly. Electronic temperature control is more than 10 times faster than mechanical response off.
7. Easy installation
The combination type SPD breaks through the limitations of the traditional modular in the installation. It can be installed on the 35mm guide rail, also can be installed under various conditions and in different directions.
Product Tags:
|
|
Combination Type 760V 27mm 25kA Surge Protection Device Images
|
